Discount Leisure Products Advice

Choosing A Pond Liner – A Discount Leisure Products Guide
 
When building a fish pond the pond liner is one of the first things purchased and can also be a confusing decision with many types available . We stock and supply Pond Liners from Gordon Low who are a Leading Pond Liner Manufacturer in the UK.
Pond Liners are available in the following materials:- PVC, Butyl, Firestone Rubber EPDM & Greenseal EPDM. Picking the right material will ensure you are free from liner troubles...

Choosing the correct pond pump for your pond is very important, it will help create oxygen, run fountain displays and even pond filter systems. This article willl hopefully make your choice easier.
Fountain Pumps :-
Usually supplied with a range of fountain attachments, a fountain pump will create fountain displays whilst adding in extra oxygen and water movement to your pond. Fountain pumps usually come with either a foam pre-filter or a fine mesh cage to prevent debris fr...

 Aquarium Heater Size Guide
To determine which heater is required for your particular aquarium and environment follow the instructions below:

Calculate the average temperature of the room that you are to locate the aquarium.
Identify the desired water temperature for your fish.
Subtract the average room temperature from the desired water temperature.
This will give the amount of heating required.


Example

Average room temperature 69 degrees F
Desired water tem...

Changing a Bioforce UV Bulb
A UV bulb helps clear green water in fish ponds by clumping together algae particles into larger particles that the filter system can remove. A UV bulb should be change every 6-12 months to maintain good performance. The best time to change a bulb is in the Spring as the weather is warming up. This means the bulb will be at its strongest for the warmer months.
Changing The Hozelock Bioforce UV Bulb
Please ensure your hands are protected from the pond wate...

Jebao 502 & 503 External Aquarium Filter



Fitting Instructions

1. Remove the filter and accessories from the box and check that all parts are inside as described on the box.
2. Carefully unclip the four lid housing clips. Gently push them upwards to free them from the pump lid. Remove the lid and pump unit by slowly lifting it upwards. There is a rubber sealing ring which attaches to the intake pipe of the cannister to give a water tight fit to the pump lid - do not loose this.
3....