Nexus Eazy Pod Filter

How The Eazy Pod Works

Water enters the Eazy Pod via the inlet and enters the outer chamber of the system. The outer chamber runs around the entire circumference of the Pod. Larger solids are settled out in this chamber due to a downward flow which is created when water moves into the central chamber.

Between the outer and central chamber is a stainless steel perforated screen, this is where the downward force is created causing the solids to settle in the outer chamber of the Eazy Pod. The water then arrives into the central chamber which holds 30 litres of Static K1 fiter media. The finer solids now become entrapped in the K1.

After passing through the Kaldness media the clean and filtered water runs into the inner return pipe of the Eazy Pod and back into the pond.

Features of the Eazy Pod Filter

• Small Footprint -only 600mm tall
• Maximum flow rate of 10,000 L/hr.(2,200 G.P.H)
• Maximum pond size 20,000 Litres(4,400 gallons) - For ornamental Ponds
• Maximum pond size 10,000 litres(2,200 gallons) - For Koi Ponds
• Easy to install and operate
• Quick and eazy cleaning - No wet or dirty hands

Installation options - Eazy Pod Filter

• Pond filtration system
• Quarantine filtration system
• Pre filter on a new or exsisting filter system
• On a skimmer line

Included with the Eazy Pod

• Eazy Pod Filter
• Eazy Pod Lid
• 30 Litres of K1 Kaldness Filter Media
• 4" Rubber Eazy Connector
• Eazy Pod Filter Cleaning Pipe

The recommended airpump for the Eazy Pod filter is the Evolution Aqua Airtech 70. Also suitable is the Pond One 8000  Air Pump