Relax pH Minus 1.5KG

To Reduce Alkalinity

• If the Total Alkalinity of your Pool is above 140ppm reduce Total Alkalinity 10ppm by adding as follows:
• Pre-dissolve the product in a clean plastic bucket of Pool water. (Dilute the product at a rate of 500gm per 5ltr bucket)
• Turn off the Pool circulation pump.
• Add 1 kilo of pH minus per 50 cubic meters (2 pounds per 10,000gal) in one spot at the deep end of your pool.
• Leave the circulation pump off for one hour. Re-start circulation; do not use the pool for a minimum of 30 minutes.
• Re-test after 24 hours and repeat if necessary.