This site uses cookies to provide and improve your shopping experience.
If you want to benefit from this improved service, please opt-in.
Cookies Page.
Swimming Pool or Spa Test Strips Chlorine/pH/Alkalinity/Stabiliser
Product Summary
Ideal for chlorinated pools and spa
Each strip tests for free chlorine, pH, total alkalinity & cyanuric acid(stabiliser)
Contains 50 test strips
Easy to use colour match on bottle
Product Description
Test strips are a simple and quick way to check your pool or spa water quality, the Aquachek test strips are very accurate and are the worlds no.1 pool and spa test strip. These swimming pool or spa test strips are simple to use, just dip the strip in the water and remove. Wait for 15 seconds and compare pads on the colour chart on the bottle. -Each test strips shows test results for: pH - a proper hardness level keeps water from causing corrosion or scaling Free Chlorine - An ideal level of Chlorine keeps water sparkling clean Total Alkalinity - A correct leverl of TA prevents sudden pH changes Cyanuric Acid(stabilizer) - Correct Cyanuric Acid protects against chlorine loss caused by sunlight
This granular shock chlorine is supplied under the 'Splash' branding and is a high quality well know brand and supplier of pool and spa chemicals.
Granular shock is used to help restore water back to a clear and sparkling condition. In order for the chemcial to be effective it is important to maintain a pH level between 7.2 and 7.6 and chlorine level between 1 and 3 ppm (parts per million)
Full instructions are supplied on the product packaging and we have 2 tub sizes on offer for the Splash granular shock chlorine
Instructions for use
Test and check the chemcial balance of the water
to increase the chlorine level by 1 ppm or mg/litre add;
2 grams per 1000 litres (220 gallons)
9 grams per 5000 litres (1100 gallons)
18 grams per 10000 litres (2200 gallons
100 grams per 60000 litres (13200 gallons)
3. Fill a clean plastic bucket with water and add the require dose of granular shock chlorine, mixing well
ALWAYS ADD CHEMICALS TO WATER AND NOT WATER TO CHEMICALS
NEVER MIX CHEMICALS
4. Add the solution to your pool or spa near the inlet with the pump running
5. Allow the chemicals to circulate for 2-3 hours then retest and repeat if necessary.
Code:
Easy treatment for shock dosing swimming popol and spa water
Effective way to restore water to a clear and sparkling condition
Granular shock chlorine - Calcium hypochlorite
Free Delivery on orders over £39.99
Postage from £3.95 for smaller orders
Express 24hr postage option available
14 day returns
International Shipping on non electrical products only
We aim to ship all orders received by 12 pm the same day with the exception of fibreglass fish ponds, Gardeco products & other special order products.
The 24 hr postage option does not include deliveries at weekends or bank holidays.