Test strips are a simple and quick way to check your pool or spa water quality, the Aquachek test strips are very accurate and are the worlds no.1 pool and spa test strip.
These swimming pool or spa test strips are simple to use, just dip the strip in the water and remove. Wait for 15 seconds and compare pads on the colour chart on the bottle.
-Each test strips shows test results for:
pH - a proper hardness level keeps water from causing corrosion or scaling
Free Chlorine - An ideal level of Chlorine keeps water sparkling clean
Total Alkalinity - A correct leverl of TA prevents sudden pH changes
Cyanuric Acid(stabilizer) - Correct Cyanuric Acid protects against chlorine loss caused by sunlight
-50 test strips in each bottle
Chlorine granules with built in stabiliser making this a premium sanitiser for both swimming pools and spa water treatment. Chlorine levels should be maintained at 1-3 PPM for pools and 3-5 in spa water, with a pH of between 7.2 and 7.6
Dosage
General Precautions:
Never mix with any other chemicals, including cleaning products, weedkillers and other chlorine products, as a dangerous reaction may occur.
When pre-dissolving the product always use a clean plastic container. If in doubt wash thoroughly before use.
Aways handle products in a well ventilated area, preferably outdoors.
When dissolving always add product to water and not vise versa.
Always wash hands thoroughly after handling pool chemicals.
Store in a dry place, ensure chemicals do not become damp in storage.
Instruction and dosages given are a guide for most effective use.