A concertrated filter and cartridge cleaner to be used during regular maintenance of your sand filter or filter cartridges.
-Relax Filter & Cartridge Cleaner
-500ml bottle
For use with sand filters:
Backwash the sand filter,drain and isolate, replace drain before proceeding.
-Add at rate
-18" sand filter = 250ml Filter & Cartridge Cleaner
-24" sand filter = 500ml Filter & Cartridge Cleaner
-30" sand filter = 750ml Filter & Cartridge Cleaner
-36" sand filter = 1000ml Filter & Cartridge Cleaner
-Fill sand filter chamber with water and allow to soak overnight. Rinse thoroughly to waste for 2 minutes before returning the filter to service.
For use on Cartridge filters:
Remove cartridge and other screens from the unit and flush soiling from filter body, cartridge and screen. Soak overnightin a 5% solution of Relax Filter & Cartridge Cleaner. Rinse thoroughly, allow to dry and clean with a soft brush.
A concertrated filter and cartridge cleaner to be used during regular maintenance of your sand filter or filter cartridges.
-Relax Filter & Cartridge Cleaner
-1000ml bottle
For use with sand filters:
Backwash the sand filter,drain and isolate, replace drain before proceeding.
-Add at rate
-18" sand filter = 250ml Filter & Cartridge Cleaner
-24" sand filter = 500ml Filter & Cartridge Cleaner
-30" sand filter = 750ml Filter & Cartridge Cleaner
-36" sand filter = 1000ml Filter & Cartridge Cleaner
-Fill sand filter chamber with water and allow to soak overnight. Rinse thoroughly to waste for 2 minutes before returning the filter to service.
For use on Cartridge filters:
Remove cartridge and other screens from the unit and flush soiling from filter body, cartridge and screen. Soak overnightin a 5% solution of Relax Filter & Cartridge Cleaner. Rinse thoroughly, allow to dry and clean with a soft brush.
Relax Stain & Scale treatment inhibitor is a sequestering agent that helps prevent dissolved solids from precipatating and also helps remove exsiting deposits.
-Relax Stain & Scale Inhibitor
-1000ml Bottle
-Suitable in swimming pools and spas
Prevention Dosage:
-Dilute 150ml per 45 cubic metres of water(10,000 gallons/45,000 litres) as an initial dose and then top up with 50ml per 45 cubic metres.
-Add directly over the pool inlets when pump is running
Dosage for removal of deposits:
-For visible stains or scale, dilute 400ml per 45 cubic metres(10,000 gallons/45,0000 litres). Brush affected area after application. More than one application may be required.
