CUSTOMER RETURN BOX OPENED BUT NOT USED

• Intex 2.2kw Electric Pool Heater For Above Ground Pools Upto 12ft
• Suitable For Easy Set Or Metal Frame Swimming Pools Upto 12ft
• Easy Operation With Simple One Step Control 
• Splash Proof On Off Switch, IP25 Protection Class
• Low Water Sensor And Automatic Shut Off
• Incline Sensor: Automatic Shut Off If Heater Tips Over
• Indicator will light up green when working
• Temperature Sensor: Automatic Shut Off If Water Or Heating Unit Temperature Exceeds Safe Operation Range
• 2 metre cable with UK RCD plug 
• Minimum Flow Rate Requirement Of 530 GPH
• INCLUDES INTEX FLOATING THERMOMETER

CUSTOMER RETURN BOX OPENED BUT NOT USED

The Intex 2.2kW heater is designed for Easy Set & Metal Frame swimming pools up to 12ft in diameter.
Connects to the Intex 32mm hose on the 8ft, 10ft & 12ft pools

This Intex pool heater Is easy to operate with a simple push button switch, The Heater is designed to take the chill off pool water, due to the lack of insulation on above ground pools heat rise can be slow and can take several hours.

1 length of 32mm hose and 2 x hose clips included

This Intex swimming pool is covered by a manufacturer's warranty Intex Warranty

This Intex heater is a small heater with NO pump, it will require a filter pump to make it work. It has a high temperature cut out at 35 degrees and a low temperature sensor at 28 degree, This mean that if it reaches its maximum temperature which is unlikely in a pool, it will cut out and not come back on until it drops below 28 degrees.

If you experience issues with the unit tripping out then please check the electrical supply, the heater consumes lots of electric which can often cause overloading if the supply is running many other electrical items.

Flow rate requirements for this heater must be Minimum Of 530GPH (1893 and 9464 litres per hour)

THESE CANNOT BE USED WITH AN EXTENSION LEAD

• Secure payment options provided by Sage Pay & PayPal
• Our website is secure (HTTPS) at checkout